Marin
Marin Electric: Alpine Trail E2

Marin Electric: Alpine Trail E2

$6,299.00
(No reviews yet) Write a Review
Condition:
New

Description

Marin Electric: Alpine Trail E2 29er

 

MOUNTAIN BIKING WITH A BOOST

BEYOND CAPABLE, BOTH UP AND DOWN, IN EVEN THE MOST CHALLENGING TERRAIN MAXIMIZING FUN

 

The Alpine Trail E2 form Marin at Bike Attack will take you further, faster, allowing you to tackle the most aggressive trails either up or down.

 

SUSPENSION: Fox 38 Performance Elite / Fox Float DPX2

WHEEL SIZE: Mixed 29"/27.5"

FRAME: Aluminum

SIZES: SMLXL

 

SPECIFICATIONS

  • FRAME

    All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

  • FORK

    Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender

  • SHOCK

    Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring = 350lb, L/XL Spring = 450lb

  • RIMS

    Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible

  • HUB REAR

    Shimano HB-MT510B, 148x12mm, Centerlock, Microspline Freehub Body

  • HUB FRONT

    Forged Alloy, 110x15mm, Centerlock Disc, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible

  • DERAILLEUR REAR

    Shimano XT 8100 12-Speed, SGS

  • DERAILLEUR FRONT

    -

  • SHIFT LEVER

    Shimano SLX 7100 12-Speed, I-Spec EV

  • CRANKSET

    e13 e*Spec Plus Crank, 165mm Length with e13 e*Spec DM Chainring 38T, e13 Plus Chainguide, Aluminum Plate

  • MOTOR

    Shimano STEPS EP8 Drive Unit, 250W, 85Nm

  • CHAIN

    KMC E12S, E-Bike Specific Chain

  • CASSETTE

    Shimano SLX M7100, 12-Speed, 10-51T

  • BRAKES FRONT

    Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor

  • BRAKES REAR

    Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor w/ Speed Sensor

  • BRAKE LEVERS

    Shimano SLX Levers, I-Spec EV

  • HANDLEBAR

    Deity Ridgeline, Stealth Finish, 35mm Clamp, 800mm Width

  • STEM

    Deity Copperhead 35mm, Black Ano

  • GRIPS

    Marin Single Clamp Locking

  • HEADSET

    FSA No 57, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    X-Fusion Manic, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm

  • SADDLE

    Marin E-MTB Saddle

  • PEDALS

    Marin MTB Plastic

  • BATTERY

    BT-8036, Internal 630Wh

  • DISPLAY

    SC-E8000 Display

  • SWITCH

    SW-E7000 Left Hand Switch for Assist Mode Change

  • EXTRAS

    Shimano Left Hand Switch for Assist Mode Change, Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle

 

GEOMETRY

Alpine Trail E2 geometry diagram
  SMLXL
ASTACK 613 622 631 640
BREACH 445 465 485 505
CHEADTUBE ANGLE 63° 63° 63° 63°
DHEADTUBE LENGTH 100 110 120 130
ESEATTUBE ANGLE 78° 78° 78° 78°
FSEATTUBE LENGTH 390 400 425 430
GTOPTUBE EFFECTIVE 575 597 619 641
HBB HEIGHT 340.5 340.5 340.5 340.5
IBB DROP 28 28 28 28
JCHAINSTAY 435 435 435 435
KWHEELBASE 1215 1239 1264 1288
LSTANDOVER HEIGHT 681.6 681.4 686.8 689.8
MFORK OFFSET 44 44 44 44
SEATPOST DIAMETER 30.9 30.9 30.9 30.9
HANDLEBAR WIDTH 780 780 780 780
STEM LENGTH 35 35 35 35
CRANK LENGTH 165 165 165 165

All lengths in millimeters

 

TECHNOLOGY

 

SERIES 4 ALUMINUM FRAME

Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

 

MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.

 

MIXED WHEEL SIZES

29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.

 

DROPPER POST OPTIMIZED

The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.

 

AIR CHARTS

REAR SHOCK SET UP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SET UP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

FOX FLOAT DPX2

RIDER WEIGHT AND AIR PRESSURE
LBSKGCOIL LB/IN
120 54 300
130 59 300
140 64 300
150 68 350
160 73 350
170 77 350
180 82 400
190 86 400
200 91 400
210 95 450
220 100 450
230 104 450
240 109 500
250 113 500
260 118 500
270 122 500

 

 

 

 

Related Products

Customers Also Viewed